Consumable kit for replacing the glass Dinitrol

Besides the robust tool when replacing Windows it is also necessary to have high-quality consumables for inserts. These are products with the brand Dinitrol. This company has been on the market for over 10 years and won the trust of many professionals. In a wide range of the company includes all required adhesives, sealants and consumables for the professional installation of glass. DINITROL company is constantly working to improve the quality, reliability and durability of products. Supplies of this kit will last for about 8 - 10 windshields (depending on size). Technology application materials to replace glass Dinitrol: 1) surface Preparation - cleaning and activation of glass and frame surface Materials: Activator/ cleaner Dinitrol 520 Usage: Put the glass working surface up on a special table with rigid fixing of glass. Shake the activator - cleaner, moisten the cloth (technical cloth) or paper towel and apply the composition of the uniform motion in the same direction on the edge of the glass around the perimeter of width 1.5 - 2 cm after 1-2 minutes the excess cleaner to remove using a clean napkin in the same uniform motion in the same direction. After using Dinitrol 520 should be sealed tightly, as it attracts moisture, which loses its properties (freezes). Consumption: approximately 35 g/m manual application on non-porous surface. Additional materials: paper napkin, cloth (technical cloth), a special table with rigid fixation, rubber gloves 2) glass Primer - primer/primer on the glass for a durable product. Materials: Dinitrol 530 Primer Usage: On clean and revitalized edging glass using the applicator apply a uniform movement in one direction equal to the layer of primer/primers. Before opening Dinitrol 530 need to be shaken, after use, immediately close. Primer dries in 10 minutes. Note: a) a Layer of soil protects PUR adhesive from UV rays and thus ensures durability of the product. Must apply a layer of soil is quite dense and without spaces. b) When replacing glass primer 530 is applied to an old layer of sealant. If the installation of the new glass, it requires priming the surface of the frame by using composition of Dinitrol 550. Coverage: approximately 125 g/sqm Additional materials: wool applicator, rubber gloves. 3) Bonding of glass - adhesive-sealant Materials: adhesive sealant Dinitrol F500 Usage: Open the cartridge and insert it into the gun. Apply polyurethane glue evenly around the perimeter of the glass (or the frame), hold the glue gun at an angle of 90 degrees to the surface of the glass, ensuring uniformity on the back side of the glass. Install the glass into the frame. To avoid shifting the glass down, fix it immediately after installation. Note: a) the time of film formation of the adhesive 20 to 25 minutes. After applying the adhesive, the glass should be set in place during this time. b) Optimum temperature and bonding items when working with the glue is in the range of 5-35 degrees. Coverage: 70-75 g/m linear Additional materials: gun, pen - suckers. A complete set of consumables for replacement glass Dinitrol: № Name Number 1 520, the activator/cleaner, 250 ml 12020 - 1 2 530, primer glass/metal, 250 ml. 12026 - 1 3 F500, polyurethane adhesive (sealant), 2 hour, Cartridge, 310 ml. 12180 - 12 Item weight: 8 kg Product type: accessory sets