Description: 410 UV polyurethane adhesive (sealant), 310 ml Dinitrol Grey, white or black one-component polyurethane adhesive sealant with significantly improved resistance to UV rays. Painted. Features: DINITROL 410 UV is a gray, white or black one-component polyurethane sealant and adhesive. Does not drip on vertical surfaces and is resistant to UV rays. Quickly hardens, elastic. You can cover the top of almost all types of paints. Painting flexible connections must be carried out using a coloring system forming the flexible film to avoid cracking the paint. Possible immediate painting (wet-on-wet) with acrylic paints 2K, however, this painting is not desirable to carry out the paint with alcohol or alkyd polymers, because these substances interfere with the curing. Scope: DINITROL 410 UV is used for sealing and bonding in various industries such as the manufacture of buses, trailers, trucks. It is easily sealed with a clean primed and painted metals, plastics (polyester and hard PVC), wood and glass. In addition, it is suitable for internal and external construction works with the bond overlapping joints, flat roofs, sun decks, decorative and protective finishes, etc., and also for caravans, buses and trucks. To test the functional qualities of the composition on a poorly fastened grounds, for example, plastics etc. recommended to test adhesion prior to carrying out works. Application: DINITROL 410 UV is applied at room temperature of the ammunition, the packaging film or container. For the application of the containers is required the piston pump, designed for air-cured products. Preparatory work: Surface should be dry, clean and free from oil and grease. Require standard surface preparation. If you have any questions, consult DINITROL or do a practical test. Technical data: Raw material basis:Polyurethane prepolymer Color:Gray, black and white The flow: (2.6 mm/2.8 bar 20°C: 45-60 g/min (rounds) Density: (20°): Approximately 1.2. g/ml Processing temperature:+5 to +35 °C Temperature resistance:-40 to +90 °C (short-term exposure up to 120°C) Resistant to: Long term:Water, sea water, weak acid concentration, caustic rastvory detergents, water-based Short-term: Oil, gasoline and mineral oil Hardening: By evaporation of moisture The formation of surface film:Approx 35-45 min. Surface drying(disappearance of stickiness):approx 2.5 hours Speed curing: - 3 mm for 24 hours (at 23°C/50% relative humidity) The rigidity of the slice A: 45-50 Tensile strength at break( DIN 53504):> 1.8 n/sq mm Elasticity in tension(DIN 53504): approx 600% Elasticity modulus 100%: approx 1.0 n/sq mm after 24 hours (DIN53504) Painting above: acrylic paint 2 K, the elastic covering materials (paints latex-based, water diluted acrylic paint). You need to check ink system water-based for compatibility prior to the commencement of work because their chemical composition may vary. When inks based on alcohol, alkyd resin or nitrocellulose or paint stoving at temperatures exceeding 62°C polyurethane UV ДИНИТРОЛ410 must dry completely, otherwise the curing process may be broken. Cleaning: white spirit Storage: DINITROL 410 UV can be stored up to 12 months in unopened original containers at temperature from +5° to +25°C. Store in a cool dry place, keep away from moisture and direct sunlight. IMPORTANT! After opening the containers and their contents should be fast to use. Manufacturer: Dinitrol Item weight: 0.3 kg Manufacturer (Brand): Dinitrol Product type: Polyurethane adhesive 310 ml (cartridge)