Thickness gauge paint coating TC 515, Horstek measures as iron and aluminum. Self-calibrating the thickness gauge Horstek TC 515-further development of the legendary models of the thickness TC 215 V3. The modern machines available today have been implemented in this model. The body of the thickness gauge paint coating Horstek TC 515 made in modern design, with all the requirements of ergonomics. Because of this, to use the thickness gauge easily and conveniently. Thickness Horstek TC 515 is equipped with multifunctional multi-language menu. From the very beginning of the design of this gauge, the emphasis was on simplicity of operation combined with broad functionality. Therefore, the device is controlled with just one button instead of 3 keys TC 215 and 5-6 keys of the thickness of the "gun". Navigate between the different modes is done with the help of a Russified menu. The thickness gauge works in both point and continuous measurement mode. For this model the thickness gauge does not require any additional calibration-by default, the device is calibrated for coating thickness of 120 microns, which is optimal for assessment of the car. The darkness no longer an obstacle for evaluation of the vehicle as the thickness Horstek TC 515 is equipped with built-in lighting measurements. There is no fear that the device will fail at the most unexpected moment due to battery drain, since the thickness uses 2 batteries instead of one in previous models. The paint coating thickness gauge TC 515 significantly improves measurement speed. It has increased by more than 2 times and now amounts to about 0.2 seconds vs 0.5 seconds Horstek thickness TC and 115 TC 215 V3 and more than 1 second in similar devices from other manufacturers. The use of more modern components and deep processing circuitry will significantly reduce the cost of this model. With all the abundance of different functions, the thickness of paint coating Horstek TC 515 remains one of the most compact devices on the market - it weighs less than 50 grams! Manufacturer warranty 2 years Characteristics of the thickness TC 515: • Measured the surface of ferrous and non-ferrous metals (Fe+Al) • Frequency calibration not required self-calibration • Check the auto cars of all brands • Measuring range 0-1250 ?m (0-1,25 mm) • Accuracy ±1-5% • Resolution 0.001 mm (1 mm) • Operating temperature -25...50 °C • Weight 40 g • Dimensions 102x35x23 mm • Time of continuous operation from battery 25 hours • Continuous measurement v • Mode spot metering v • Auto power off v • Beep v • Self calibration v • Menu Russified • Power 2x1.5 AAA (mizinchikovye batteries) Equipment thickness gauge Horstek TC 515 : • Electronic thickness gauge 1 PCs • Battery (AAA battery) 2 PCs • Hard cover (carrying case) 1 PC • Reference CD 2 piece • The reference plate 1 PCs • Instruction in Russian 1 PCs • Warranty card 1 PCs Item weight: 0.1 kg Manufacturer (Brand): Horstek